What is natural stone veneer?
+
Natural stone veneer is a very thin layer of real stone mounted on a flexible backing. It gives walls, furniture, doors, counters, and interior surfaces the look and texture of natural stone, but with much less weight than a traditional stone slab. Each sheet is unique because the visible surface is made from real stone.
What is the difference between stone veneer and a traditional stone slab?
+
A traditional stone slab is thick, heavy, and normally requires special handling or a stone specialist. Stone veneer is thin, lightweight, and easier to cut, transport, and install. This makes it ideal for renovation projects, decorative walls, furniture fronts, ceilings, and surfaces where full stone slabs would be too heavy or too expensive.
Where can stone veneer be used?
+
Stone veneer can be used on interior walls, feature walls, furniture, doors, reception desks, shopfitting, hotel projects, kitchens, bathrooms, and many decorative surfaces. Depending on the selected product and the correct protection, it can also be used in humid areas or outdoor applications. For demanding areas, always check the technical sheet and choose the right adhesive, primer, protection, and installation method.
Can stone veneer be used in bathrooms, showers, and kitchens?
+
Yes, stone veneer can be used in bathrooms, showers, and kitchens when the substrate is correctly prepared and sealed. In wet or splash areas, the surface should be protected with a suitable impregnation or sealer to make cleaning easier and improve long-term durability. The wall behind the veneer must also be waterproofed according to the applicable building standards, exactly as with tiles or other wall coverings.
Can stone veneer be installed over old tiles?
+
In many renovation projects, stone veneer can be installed directly over existing tiles. The tiles must be stable, clean, dry, free of grease, and correctly prepared. On horizontal or very uneven surfaces, old grout lines may need to be filled first so they do not show through later. A full-surface adhesive application is important to avoid hollow spots and to achieve a clean result.
How is stone veneer installed?
+
The basic installation is simple: prepare the surface, cut the veneer if necessary, apply the correct adhesive over the full surface, position the sheet carefully, and press it evenly with light pressure or a roller. The exact method depends on the product type, the substrate, and the application area. For best results, follow the technical data sheet and test the adhesive and protection on a small piece before starting the full project.
How can stone veneer be cut or adapted on site?
+
Most stone veneer sheets can be cut with common tools such as a circular saw, jigsaw, multitool, cutter, or scissors, depending on the product backing and thickness. It is usually best to cut from the back side and then lightly sand the edge if needed. This allows precise adjustments around sockets, edges, corners, furniture parts, or custom wall dimensions.
Should stone veneer be installed with or without joints?
+
Stone veneer can often be installed either edge-to-edge for a cleaner, continuous stone look, or with joints for a tile-like appearance. In showers and very humid areas, a jointed installation can make cleaning and sealing easier. For visible outside corners, you can use finishing profiles, carefully work edge-to-edge, or prepare mitred corners depending on the design and the installer’s experience.
How do I protect, clean, and maintain natural stone veneer?
+
In dry interior areas with low stress, stone veneer may not always need extra protection. In kitchens, bathrooms, showers, commercial areas, or surfaces that are touched often, a suitable impregnation or sealer is recommended. For cleaning, use water, a soft cloth or brush, and non-aggressive household cleaners. Avoid acidic, abrasive, or very strong chemical products unless they are approved for natural stone.
What is photo matching and why is it useful before delivery?
+
Photo matching is a service where the customer receives a photo of the available stone veneer batch before the order is shipped. This is useful because every sheet of natural stone has its own colour, structure, and movement. The customer can better understand the final look, and the team can select a batch that is closer to the requested style. The delivery time normally starts after the customer confirms the photo selection, because the order is prepared only once the visual choice is accepted.
